San Antonio's Fastest Entry-Level Plumbing Program.
6 weeks. 240 hands-on lab hours. Walk out with OSHA 10 certification and the skills San Antonio plumbing contractors actually need on day one.
*Wage data based on Texas Workforce Commission (TWC) and regional labor market estimates for entry-level plumbing apprentices in the San Antonio area. Individual compensation varies by employer and experience.
6 weeks to earning. Not 2 years.
San Antonio has a few paths into plumbing. Here's how they compare on the factors that matter most: time, cost, depth of training, and what you actually walk out with.
What San Antonio plumbing contractors actually hire for.
Plumbing in San Antonio is steady, well-paid work, and in high demand. Tradecraft’s plumbing program builds the exact skills local contractors hire for on day one: residential rough-in, DWV systems, fixture installation, commercial plumbing, and job-site troubleshooting.
You’ll train on real materials and equipment in our San Antonio lab, PEX, copper, PVC, and cast iron. Before graduating, you'll complete a full rough-in, a residential trim-out, commercial scenarios, and a timed troubleshooting final.
Job readiness isn’t an afterthought. We teach you how to communicate with lead plumbers, navigate job sites, and build a lasting career in the trade.
What you leave with
- ✓ OSHA 10 Certification, required on virtually every San Antonio job site
- ✓ Texas plumbing apprentice eligibility
- ✓ 240 documented clock hours of hands-on training
- ✓ Experience with PEX, copper, PVC, and cast iron systems
- ✓ Residential + commercial systems, both covered
- ✓ Referrals to San Antonio-area plumbing hiring partners
Free. No commitment. San Antonio campus.
What training actually looks like.
Real equipment, real tools, real hours on the floor. This is the San Antonio lab where students spend 70%+ of the program.
240 hours. 73% of it in the lab.
Plumbing is a physical trade. You learn it by doing it. Cutting, joining, fitting, testing, fixing. Tradecraft's curriculum is structured around that reality: the majority of every day is hands-on, with instruction built to support what you're doing in the lab, not the other way around.
The 7:00 AM start mirrors a real job-site day. By the time you're working for a San Antonio contractor, that schedule will already feel normal.
Daily structure: 50 minutes instruction + 10-minute break = 1 clock hour · 8 instructional hours per day · 7:00 AM – 3:30 PM
Plumbers are in demand
across San Antonio, year round.
San Antonio is one of the fastest-growing metropolitan areas in Texas. Every new residential development, commercial build, and municipal infrastructure expansion requires skilled plumbing teams. Tradecraft Schools graduates enter a high-demand sector with continuous regional growth.
Residential plumbing
Rapid home construction across Alamo Ranch, Converse, Schertz, and the far North Side drives constant need for residential plumbers. From rough-ins to fixture installations, local contractors are actively seeking entry-level apprentices.
Commercial & industrial
Major commercial builds in the South Texas Medical Center, downtown San Antonio, and logistics hubs along I-35 require commercial plumbing crews. Cast iron, large pipe systems, and code compliance give Tradecraft grads an edge.
Government & military facilities
JBSA, Fort Sam Houston, and Lackland AFB rely on local civilian contractors for facility plumbing maintenance and infrastructure upgrades. Military veterans completing Tradecraft's plumbing program have a direct advantage in this sector.
Six weeks of entry-level plumber training. One clear outcome.
Every week builds on the last. You'll move from plumbing theory to hands-on piping to job-site readiness, all at our San Antonio lab.
Safety + OSHA + Tool Foundations
- OSHA 10, PPE, and jobsite safety
- Ladder safety and hazard recognition
- Hand tools, pipe tools, and measuring
- Pipe cutting, reaming, and deburring lab
- Fastening, supports, anchors, and layout
Plumbing Fundamentals
- DWV and water supply overview
- Pipe types: PVC, CPVC, PEX, and copper
- Measuring, cutting, and joining methods
- Fittings, valves, and connection types
- Blueprint reading and layout introduction
Residential Rough-In
- Water supply rough-in, PEX and copper
- DWV rough-in with PVC systems
- Fixture placement and spacing
- Venting concepts and practical layout
- Full residential rough-in lab project
Residential Trim-Out + Fixtures
- Fixture installs, sinks and toilets
- Faucets, valves, and shutoffs
- Water heater intro and connections
- Leak testing and system checks
- Full trim-out project
Commercial Plumbing Fundamentals
- Commercial systems overview
- Larger pipe systems and support requirements
- Cast iron intro and no-hub connections
- Floor drains, cleanouts, and layout
- Commercial install lab project
Career Readiness & Testing
- Leak detection and troubleshooting techniques
- Drain clearing basics and maintenance
- Mixed system install and repair scenario
- Final practical exam
- Resume, interview prep, employer expectations
Eugene
"We will give you real-world experiences."
Meet Eugene, the Plumbing Program Director at Tradecraft Schools. Eugene designed our San Antonio lab specifically to mimic actual job sites, giving students hands-on time with real piping, fixtures, and troubleshooting scenarios. By training under real-world conditions, students graduate with the practical skills, field familiarity, and confidence needed to step onto any job site as a capable plumber on day one.
$10,500. Multiple ways to pay.
San Antonio plumbing apprentices earn $20.66/hr or more in their first year. At $10,500 total and 6 weeks to employment, this program pays for itself in about 12 weeks of work. We offer multiple financing options, so the cost of training isn't what holds you back.
Plumbing trade school in San Antonio, answered.
Everything you need to know before you schedule a tour.
How long is the plumbing training program?
How much does plumbing school cost in San Antonio?
How much do plumbers make in San Antonio?
What certifications do I earn from the program?
Do I need prior plumbing experience to enroll?
Hands-on training that pays off.
"I get to pick their brains on residential and commercial plumbing so I know how to put an entire house together."
Joined Tradecraft's plumbing program in San Antonio to build on basic handyman experience. Learning directly from instructors with backgrounds in both residential service and commercial projects, gaining the hands-on skills needed to launch a long-term, lucrative career in the trades.
Built for some people more than others.
- • You want to work with your hands in a skilled trade
- • You're comfortable with an early start: 7 AM daily
- • You want a year-round career in San Antonio's climate
- • You don't want to spend 2 years in a classroom before earning
- • You're a veteran looking for a fast civilian career path
- • You're ready to go full-time in a lab from day one
- • You want a fully online or remote program
- • You can't commit to the full 6-week in-person schedule
- • You prefer a slow-paced, self-directed learning environment
- • You want a guaranteed job placement program
- • You're not ready to start working in the field after training
Your new career starts here.
Claim your spot.
The Tradecraft 6-week Plumbing pre-apprentice program runs Monday – Friday (7:00 AM – 3:30 PM). Lab capacity is strictly capped to guarantee hands-on seat time.
Want more information?
Click the button below to get full program details and connect with our San Antonio admissions team.
Come see our San Antonio campus.
Meet the instructors and team.
Tours are free, take about an hour, and answer every question you have before committing to anything.
